46
List of Menus
(
In tx-rx (cm) mode
)
Item number
Category
Item
Arguments
Function
C022
setup (Tx)
mpeg_ch12_mode
stereo
Specifies the audio mode for channels 1
and 2 as stereo.
dual
Specifies the audio mode for channels 1
and 2 as dual.
off
Disables the audio for channels 1 and 2.
C023
setup (Tx)
mpeg_ch12_rate
128
Sets the bit rate of the audio for channels 1
and 2 to 128 kbps.
192
Sets the bit rate of the audio for channels 1
and 2 to 192 kbps.
256
Sets the bit rate of the audio for channels 1
and 2 to 256 kbps.
384
Sets the bit rate of the audio for channels 1
and 2 to 384 kbps.
C024
setup (Tx)
mpeg_ch34_mode
stereo
Specifies the audio mode for channels 3
and 4 as stereo.
dual
Specifies the audio mode for channels 3
and 4 as dual.
off
Disables the audio for channels 3 and 4.
C025
setup (Tx)
mpeg_ch34_rate
128
Sets the bit rate of the audio for channels 3
and 4 to 128 kbps.
192
Sets the bit rate of the audio for channels 3
and 4 to 192 kbps.
256
Sets the bit rate of the audio for channels 3
and 4 to 256 kbps.
384
Sets the bit rate of the audio for channels 3
and 4 to 384 kbps.
C026
setup (Tx)
lpcm_channel
1-2
Specifies channels 1 and 2 for linear PCM.
3-4
Specifies channels 3 and 4 for linear PCM.
1-4
Specifies channels 1, 2, 3, and 4 for linear
PCM.
Note
If “tx-rx” is selected in the B:mode menu,
note that only 4 channels at the maximum
of Linear PCM Audio are supported.
C027
setup (Tx)
lpcm_word_len
16
Sets the linear PCM sample word length to
16 bits.
20
Sets the linear PCM sample word length to
20 bits.
24
Sets the linear PCM sample word length to
24 bits.
C028
setup (Tx)
tx_audio_sg
off
Disables the internal test signal generator.
1 kHz
Enables the internal test signal generator
to output a 1 kHz sine wave.
silence
Enables the internal test signal generator
to output silence.
C051
setup (Rx)
rx_audio_sg
off
Disables the internal test signal generator.
1 kHz
Enables the internal test signal generator
to output a 1 kHz sine wave.
silence
Enables the internal test signal generator
to output silence.
