43
List of Menus
(
In tx-rx mode
)
Note
“C124” to “C146” are commands for I/O of UDP
port user data as DVB-ASI (option functions), but
are not currently supported.
Item number
Category
Item
Arguments
Function
C128
*
setup (Tx)
tx_udata2_port
05000 to 09001 to 65535 Sets the UDP port No. for picking up user
data 2 from the MSBA-20IP.
C129
*
setup (Tx)
tx_udata2_rate
1 to 30
Specifies rate for getting user data 2 from
the MSBA-20IP.
Unit: Mbps
C141
*
setup (Rx)
rx_udata1
off
Disables user data1 output from the UDP
port, via the MSBA-20IP.
on
Enables user data1 output from the UDP
port, via the MSBA-20IP.
C14
2*
setup (Rx)
dst_udata1_port
05000 to 09000 to 65535 Sets the UDP port No. for outputting user
data1 from the MSBA-20IP.
C143
*
setup(Rx)
dst_udata1_ip
000 to 192 to 255.
Sets the destination IP address for output
000 to 168 to 255.
of user data1 from the MSBA-20IP.
000 to 001 to 255.
000 to 003 to 255
C144
*
setup (Rx)
rx_udata2
off
Disables user data 2 output from the UDP
port, via the MSBA-20IP.
on
Enables user data 2 output from the UDP
port, via the MSBA-20IP.
C145
*
setup (Rx)
dst_udata2_port
05000 to 09001 to 65535 Sets the UDP port No. for outputting user
data 2 from the MSBA-20IP.
C146
*
setup (Rx)
dst_udata2_ip
000 to 192 to 255.
Sets the destination IP address for output
000 to 168 to 255.
of user data 2 from the MSBA-20IP
.
000 to 001 to 255.
000 to 003 to 255
C998
setup
cancel
–
Cancels a setup change before execution.
C999
setup
init
–
Returns setup items to their factory default
settings.
–
setup
list
–
Displays the list set in setup.
This is a special-purpose command for
RS232C/telnet operation.
