77
3. Camera Operations
Monitoring Menu
The functions and available settings of each menu item are given below.
Default values are shown underlined and in
bold
text.
Monitoring >
Output Format
Makes settings related to output format.
Menu item
Setting
Description
SDI 1/2
The available settings vary
according to the imager mode,
project frame rate, and
recording format settings.
Selects the SDI 1/2 output format.
Settings vary according to the recording
format (page 125).
SDI 3/4
The available settings vary
depending on the SDI 1/2
setting.
Selects the SDI 3/4 output format.
Settings vary according to the recording
format (page 125).
Monitor
The available settings vary
depending on the SDI 1/2
setting.
Selects the Monitor output format.
Settings vary according to the recording
format (page 130).
HDMI
The available settings vary
depending on the SDI 1/2
setting.
Selects the HDMI output format.
Settings vary according to the recording
format (page 130).
3G SDI 1/2/3/4
Output
Level A/
Level B
Selects whether the 3G SDI output format is
Level A or Level B.
Monitoring >
Output Display
Makes settings related to monitor display.
Menu item
Setting
Description
Flip Image
Normal
/Horizontal Flip/
Vertical Flip/H & V Flip
Sets the orientation of the shooting mode
image. When set to Normal, the image is not
flipped.
[Notes]
• AXS recording images are stored unflipped.
• When Vertical Flip or H & V Flip is selected, both
the video and audio signals are delayed by 1
frame at the imaging frame rate due to internal
processing.
Audio/Video Delay
Off
/1frame
Selects whether to enable the sync function
for synchronizing the audio and video with
another device that is flipping the image by
delaying the video signal and audio signal.
Off: No delay
1frame: Delay the video signal, audio signal,
and metadata (including the timecode) by
approximately 1 frame.
[Note]
Fixed to 1frame when Flip Image is set to Vertical Flip
or H & V Flip.
Monitoring >
Output Display
Makes settings related to monitor display.
Menu item
Setting
Description
Monitor Magnifier
Mode
Toggle
/Press & Hold
Selects the method for turning the focus
magnifier function of the Monitor output
image on/off.
Toggle: Toggles the magnification on/off
each time you press an assignable button
assigned with Monitor Focus Magnifier.
Press & Hold: Turns the magnification on
while you press an assignable button
assigned with Monitor Focus Magnifier.
Monitor Magnifier
Ratio
×2.0
/ ×4.0 / ×2.0/×4.0
Selects the focus magnification ratio for the
Monitor output image.
[Notes]
• Only ×2.0 can be selected when Project Frame
Rate (page 72) is set to 59.94 or 50.
• ×2.0/×4.0 cannot be selected when Monitor
Magnifier Mode is set to Press & Hold.
