USO
RESTRITO
436
Error Messages
A
p
p
e
n
d
ix
h
Error Popup button
This selects whether or not to display “ERROR” on the
menu title button when an error occurs. This button is
linked to the [Error Popup] button in the error status menu.
On:
If a device error occurs, displays “ERROR” on the
menu title button.
Off:
If a device error occurs, does not display “ERROR”
on the menu title button.
Error Messages Appearing in a Message Box
Corresponding to the content of the message, an icon
appears.
Icon
Title
Message
Icon
Message
Description
Activate License
The license key you entered is invalid.
Please check and enter again.
7316.7: Engineering Setup >System >Install/Unit Config >License >License
Management
The Activate License procedure failed because the entered information was
incorrect. Check the license key, and enter again.
Append Key Frame
[Append Key Frame] cannot be
executed.
FMx is not assigned to a user region.
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, the frame memory output (FMx)
was not assigned to a User region.
Assign the output in menu 7331.4 (Engineering Setup >Switcher >Config
>User1
–8 Config), and try again.
[Append Key Frame] cannot be
executed.
Key Frame Register is locked. (UserX)
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, the key frame register (UserX
region) was locked. Unlock the register.
[Append Key Frame] cannot be
executed.
Key Frame Register is busy. (UserX)
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, files were being loaded into
register (UserX region). Try again after file loading has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is being edited.
(UserX)
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, keyframe creation or editing was
in progress using the register (UserX region). Try again after the keyframe
operation has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is full. (UserX)
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, there were no remaining
keyframes in the register (UserX region).
