USO
RESTRITO
280
Shotbox Register Editing
1
Press the [UTIL/SBOX] assigned to the 1st row,
turning it on.
2
Press one of the bank switching buttons
, to select the bank.
Supports banks 1 to 5, numbered from left to right.
Notes
Banks cannot be selected on the cross-point control
block of the ICP-3000/3016.
3
Press the cross-point button to which the desired
shotbox is assigned.
Ch
a
p
te
r 14
Ut
ilit
y
/S
h
o
tb
o
x
Executing a Shotbox Function with
Cross-Point Buttons in the 2nd Row
You can use the bank 2nd row for utility/shotbox
operations.
Notes
To use this function, you must first assign the utility/
shotbox function switch button [UTIL/SBOX] to the 1st
row.
For details about the assignment,
Function to 1st Row Buttons” (p. 340)
You can assign any shotbox register to the cross-point
buttons.
For details about the assignment,
Function to 2nd Row Cross-Point Buttons” (p. 336)
Shotbox Register Editing
You can carry out the following editing on shotbox
registers.
•
Lock:
Write-protect the contents of the register.
•
Copy:
Copy the contents of one register to another
register.
•
Move:
Move the contents of one register to another
register.
•
Swap:
Swap the contents of two registers.
•
Delete:
Delete the contents of a register.
•
Name:
Attach a name to a register.
The procedures for shotbox register editing are similar to
the procedures described in
Unlike in effect register editing, however, it is not
necessary to specify a region in shotbox register editing.
