![background image](http://html.mh-extra.com/html/sony/mhc-wz88d/mhc-wz88d_operating-instructions-manual_1330155064.webp)
64
GB
Notes
• When you press REC PAUSE/START, the sound
field is automatically changed to LINK if the
headphones are not connected and HP 2CH if the
headphones are connected.
• You cannot listen to other sources while recording.
• When you connect or disconnect a microphone or
headphones during recording, the sound may cut off
for a moment.
Tips
• When recording from the reverse side:
After step 1 of “Recording onto a tape manually”,
press TAPE A/B repeatedly until “TAPE B” appears
in the display. Press
hH
repeatedly until the
TAPE B reverse side indicator lights up to start
playback of the reverse side. Press
x
at the point you
want to start recording.
• When recording on both sides:
Be sure to start from the front side. If you start from
the reverse side, recording stops at the end of the
reverse side.
• When recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
• When recording from a disc onto a tape manually:
You can press
.m
or
M>
(or
.
or
>
on the remote) repeatedly to select the tracks
during recording pause mode (after step 4 and before
step 6 of “Recording onto a tape manually”).
• When recording from the tape:
If you set the direction to “
j
” (or “RELAY”)
when the tapes you use have different lengths, the
tape in each deck reverses independently.
You can reinforce the bass and create a more
powerful sound.
Use the buttons on the unit for the operation.
Press DSGX repeatedly.
Each time you press the button, the display
changes as follows:
DSGX ON*
y
DSGX OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
• The default setting is “DSGX ON”.
• “DSGX” lights up in the display if “DSGX ON” is
selected.
Sound Adjustment
Adjusting the sound