![background image](http://html.mh-extra.com/html/sony/mhc-wz88d/mhc-wz88d_operating-instructions-manual_1330155059.webp)
Tu
n
e
r
59
GB
4
Press ENTER.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5
Press /– repeatedly to select
the preset number you want.
6
Press ENTER.
“Complete!” appears in the display. The
station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Other operations
To change the AM tuning interval
(except for Saudi Arabian and
Russian models)
Use the buttons on the unit for the operation.
The factory settings for AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, select any AM station first,
then turn off the system. While holding down
x
,
press
?/1
to turn on the system. “AM 9k Step”
or “AM 10k Step” appears in the display. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Note
You cannot change the AM tuning interval in Power
Saving Mode (page 76).
Tips
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
• If you press TUNER/BAND on the unit while the
system is turned off, the system turns on
automatically and “TUNER” is selected as the
function except during Power Saving Mode.
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 58).
Stop scanning
during automatic
tuning
Press
x
.
Cancel presetting
Press MENU.
j
j
STEREO
TUNED
DSGX
A
B
Preset number