Sony MHC-V90W, Operating Instructions Manual

Page: 36 / 72

36
US
MHC-V90W.UC2.4-728-217- 11 (1)
Note
•
•
You can enjoy high quality sound if AAC
or LDAC is selected. If you cannot listen
to AAC or LDAC sound from your device
or the sound is interrupted, select “SBC”.
•
•
If you change this setting while the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Hint
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a BLUETOOTH
connection. Unlike other BLUETOOTH
compatible coding technologies
such as SBC, it operates without any
down-conversion of the Hi-Res Audio
content*
1
, and allows approximately
three times more data*
2
than those
other technologies to be transmitted
over a BLUETOOTH wireless network
with unprecedented sound quality, by
means of efficient coding and optimized
packetization.
* 1 Excluding DSD format contents.
*
2
In comparison with SBC (Subband
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
Network
Selecting the method
of network connection
If you connect this system to a
network, you can enjoy this system
in various ways. Depending on your
network environment, setting up
methods are different. Select the
appropriate connecting method
for your network environment from
below.
Note
•
•
Connecting to a Wi-Fi network and a
wired network simultaneously is not
possible. When you connect to a Wi-Fi
network, be sure to disconnect the LAN
cable from the unit.
•
•
Depending on the function, the system
may need to be updated.
Method for using a smartphone/
iPhone
Installing the “Sony | Music Center”
application to your smartphone/
iPhone is required.
Before making the connection, be
sure to turn on the BLUETOOTH
feature on your smartphone/
iPhone, then operate the “Sony |
Music Center” application to connect
your smartphone or iPhone to this
system via BLUETOOTH.
For details, refer to the Wi-Fi Startup
Guide (separate document).