Sony MHC-V73D, Help Manual

Page: 31 / 187

Help Guide
Home Audio System
MHC-V73D
Using the Control for HDMI function
Connecting a TV compatible with the Control for HDMI function
*
by HDMI cable (High Speed HDMI Cable with Ethernet,
not supplied) enables you to easily operate the device by a TV remote control.
The following functions can be used with the Control for HDMI function.
System Power Off function
System Audio Control function
Audio Return Channel (ARC) function
One-Touch Play function
Remote Easy Control function
Language Follow function
Note
These functions may work with devices other than those manufactured by Sony, but operation is not guaranteed.
Preparing to use the Control for HDMI function
System Power Off function
When you turn off the TV, the system will turn off automatically.
Note
The connected device may not turn off depending on the status of the device.
Control for HDMI is a standard used by CEC (Consumer Electronics Control) for allowing HDMI (High-Definition Multimedia Interface) devices to
control each other.
*
Hold down SHIFT and press SETUP.
The setup menu appears on the TV screen.
1
Set [HDMI SETUP] – [CONTROL FOR HDMI] to [ON].
At the time of purchase, this setting is set to [ON]. For details, see Settings menu .
Enable the Control for HDMI function settings for the TV connected to the system.
If you enable the Control for HDMI (“BRAVIA” Sync) function when using a TV manufactured by Sony, the Control
for HDMI function of the system is also enabled automatically. When settings are completed, [COMPLETE] appears
on the display.
2
Hold down SHIFT and press SETUP.
The setup menu appears on the TV screen.
1.
Set [HDMI SETUP] – [STANDBY LINKED TO TV] to [ON] or [AUTO].
At the time of purchase, this setting is set to [AUTO]. For details, see Settings menu .
2.
31