MHC-V82D/MHC-V72D.GB.5-000-538-
13(1)
42
GB
3
Turn on the BLUETOOTH
function on your smartphone/
iPhone.
Note
•
•
BLUETOOTH connection is not
required unless you are using
multiple systems. If you want to
synchronize your smartphone/
iPhone with a specific system,
establish a BLUETOOTH connection
between your smartphone/iPhone
and that system (page 34).
Otherwise, proceed to step 4 and
your smartphone/iPhone will
synchronize with the nearest system.
•
•
Make sure to turn on the location
service on your smartphone/iPhone.
4
Launch “Fiestable” and touch
“Party Light via Fiestable”.
All smartphone/iPhone screen
illumination and flash light flashes
synchronously.
Control for HDMI
Using the Control for
HDMI function
Connecting a TV compatible with
the Control for HDMI function* by
HDMI cable (High Speed HDMI Cable
with Ethernet, not supplied) enables
you to easily operate the device by a
TV remote control.
* Control for HDMI is a standard used
by CEC (Consumer Electronics Control)
for allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Note
This function may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
Preparing to use the Control for
HDMI function
Hold down SHIFT and press SETUP,
then set [HDMI SETUP] – [CONTROL
FOR HDMI] to [ON] (page 29). The
default setting is [ON].
Enable the Control for HDMI function
settings for the TV connected to the
system.
Hint
If you enable the Control for HDMI
(“BRAVIA” sync) function when using a
TV manufactured by Sony, the Control
for HDMI function of the system is also
enabled automatically. When settings are
completed, “COMPLETE” appears on the
display.
Summary of Contents for MHC-V72D
