Sony MHC-V5 Operating Instructions Manual Download Page 45

Page: 45 / 52

MHC-V5.GB.4-531-350-

(1)

Additional Inf

orma

tion

Party Chain

Party Chain function cannot be
activated.

Check the connections
(page 32).

Make sure the audio cords are
connected correctly.

Adjust the volume.

There is no sound when you select
the audio in function.

Adjust the volume on the
connected equipment.

Try turning off the system, then
turning it back on again.

“PARTY CHAIN” is flashing on the
display.

The audio in function is selected
in the Party Chain function. Press
FUNCTION repeatedly to select
other function.

Try turning off the system, then
turning it back on again.

To reset the system

If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to
perform this operation.

Unplug the AC power cord, and
then plug it back in.

Press



to turn on the system.

Hold down



and BASS BAZUCA

at the same time for about 3
seconds.

“RESET” appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.

Messages

One of the following messages may
appear or flash on the display during
operation.

CANNOT PLAY

A disc that cannot be played back
was inserted.

DEVICE ERROR

The USB device could not be
recognized or an unknown device is
connected.

DEVICE FULL

The memory of the USB device is
full.

FATAL ERROR

The USB device was removed during
transfer or erase operation, and may
have been damaged.

FLDR FULL

You cannot transfer onto the USB
device because the number of folder
has reached its maximum.

NO DEVICE

No USB device is connected.

NO DISC

There is no disc in the player.

NO MEMORY

The memory selected for playback
or transfer has no memory media
inserted in the USB device.

NO STEP

All of the programmed steps have
been erased.

NO TRACK

No playable file is loaded in the
system.

Summary of Contents for MHC-V5





















































Search results

Summary of Contents for MHC-V5

Reviews:

Related manuals for MHC-V5

Brands by name

Popular brands

Sony MHC-V5, Operating Instructions Manual

Search results

Summary of Contents for MHC-V5

Reviews:

Related manuals for MHC-V5

Brands by name

Popular brands