![background image](http://html.mh-extra.com/html/sony/mhc-v44d/mhc-v44d_operating-instructions-manual_1330108031.webp)
31
GB
filename[D:\NORM'S JOB\SONY HA\SO150056\MHC-V44D (PMRF
01)\4584073121_GB\070TUN.fm]
masterpage:Right
T
uner
model name [MHC-V44D]
[4-584-073-
12
(1)] GB
Listening to the radio
1
Press FU/– repeatedly to
select “TUNER FM”.
2
Select the radio station.
For automatic tuning:
Hold down /– until the
frequency indication changes and
then release.
Scanning stops automatically when
a station is tuned in. “ST” (for FM
stereo programs only) lights up in
the display panel.
If scanning does not stop, press
to stop scanning. Then, perform
manual tuning (below).
For manual tuning:
Press /– repeatedly to tune
to the station you want.
When you tune to an FM station that
provides RDS services, information such
as the service name or station name is
provided by broadcasts. You can check
the RDS information by pressing DISPLAY
repeatedly.
To reduce static noise on a weak FM
stereo station, press FM MODE repeatedly
until “ST” disappears from the display
panel. You will lose the stereo effect, but
reception will improve.
You can store up to 20 FM stations as
your favorite stations.
1
Tune to the station you want.
2
Press DVD/TUNER MENU.
3
Press
/
repeatedly to select
the preset number you want, then
press .
“COMPLETE” appears in the display
panel. The station is stored.
If another station is already
assigned to the selected preset
number, that station is replaced by
the new one.
To tune to a preset station
Press /– repeatedly to select
the preset number you want.
You can also hold down SHIFT, then
press the numeric buttons, and then
press
to select a preset station.
Tuner
Note
Tip
Presetting radio stations