Sony MHC-V43D, Help Manual, Page: 102 / 180

Help Guide
Home Audio System
MHC-V43D
Using the Voice Guidance
IMPORTANT: THE VOICE GUIDANCE FOR THIS SYSTEM IS ONLY AVAILABLE IN ENGLISH.
To deactivate the Voice Guidance
Select [OFF] in step .
To adjust the level of the Voice Guidance
Note
The Voice Guidance volume level changes according to the system’s volume level. However, in some cases, the Voice Guidance
volume level may not change.
In some cases, there may be a delay in Voice Guidance output or the Voice Guidance may not work.
5-013-978-11(1) Copyright 2020 Sony Corporation
Press OPTIONS.
1
Press (up)/ (down) repeatedly to select [VOICE GUIDANCE], then press (enter).
2
Press (up)/ (down) to select [ON], then press (enter).
The Voice Guidance is activated.
To exit the options menu, press OPTIONS.
Depending on the status of the system, the Voice Guidance outputs from the system as follows:
When setting the system to the pairing mode: “BLUETOOTH pairing”
When connected to a BLUETOOTH device: “BLUETOOTH connected”
When disconnected from a BLUETOOTH device: “BLUETOOTH disconnected”
3
Press OPTIONS.
1.
Press (up)/ (down) repeatedly to select [SAMPLER], then press (enter).
2.
Press (up)/ (down) repeatedly to adjust the Voice Guidance level, then press (enter).
To exit the options menu, press OPTIONS.
3.
102