Sony MHC-V42D, Help Manual

Page: 155 / 167

Help Guide
Home Audio System
MHC-V42D
The Control for HDMI function does not work properly.
Check the connection with the system.
Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV.
Wait a while, then try again. If you unplug the system, it will take a while before operations can be made. Wait
for 15 seconds or longer, then try again.
Make sure the TV connected to the system supports the Control for HDMI function.
The type and number of devices that can be controlled by the Control for HDMI function is restricted by the
HDMI CEC standard as follows:
Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices
Playback devices (Blu-ray Disc player, DVD player, etc.): up to 3 devices (this system uses one of them)
Tuner-related devices: up to 4 devices
Audio system (receiver/headphone): up to 1 device (used by this system)
4-748-035-41(1) Copyright 2019 Sony Corporation
155