Sony MHC-V3 Operating Instructions Manual Download Page 19

Page: 19 / 36

Bluetoo

You can operate a

Bluetooth

device by

connecting the system and the

Bluetooth

device using AVRCP.
Check the following before playing
music:
– The

Bluetooth

function of the

Bluetooth

device is turned on.

– Pairing has been completed.

Press BLUETOOTH on the unit
to select

Bluetooth

function.

“BT AUDIO” appears in the display
panel.

Establish connection with the

Bluetooth

device.

Press BLUETOOTH on the unit to
connect to the last connected

Bluetooth

device.
Perform the

Bluetooth

connection

from the

Bluetooth

device if the device

is not connected.
Once the connection is established, the

Bluetooth

device name appears in the

display panel.

Press

to start playback.

Depending on the

Bluetooth

device,

– you may need to press

twice.

– you may need to start playing an

audio source on the

Bluetooth

device.

Notes

• When the system is not connected to any

Bluetooth

device, the system will connect to

the last connected

Bluetooth

device

automatically when you press

• If you try to connect another

Bluetooth

device

to the system, the current connected

Bluetooth

device will be disconnected.

To disconnect the

Bluetooth

device

Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display
panel.
Depending on the

Bluetooth

device, the

Bluetooth

connection may be canceled

automatically when you stop playback.

Use the buttons on the unit to perform this
operation.

Press BLUETOOTH to select

Bluetooth

function.

“BT AUDIO” appears in the display
panel.
If the system is connected to a

Bluetooth

device, the

Bluetooth

device

name appears in the display panel.
Press BLUETOOTH to disconnect the

Bluetooth

device.

Hold down

and

DJ EFFECT for

about 3 seconds.

“BT HIST CLEAR” appears in the
display panel and all the pairing
information is erased.

Setting the

Bluetooth

standby mode

The

Bluetooth

standby mode enables the

system to turn on automatically when you
establish the

Bluetooth

connection from a

Bluetooth

device.

Use the buttons on the unit to perform this
operation.

Press OPTIONS.

Press

V/v

repeatedly to select

“BT STBY”, then press ENTER.

Playing music from a

Bluetooth

device

Erasing all the pairing
registration information

Summary of Contents for MHC-V3





































Search results

Summary of Contents for MHC-V3

Reviews:

Related manuals for MHC-V3

Brands by name

Popular brands

Sony MHC-V3, Operating Instructions Manual

Search results

Summary of Contents for MHC-V3

Reviews:

Related manuals for MHC-V3

Brands by name

Popular brands