Sony MHC-V11, Service Manual

Page: 1 / 54

SERVICE MANUAL
Sony Video & Sound Products Inc.
Published by Sony Techno Create Corporation
MHC-V11
SPECIFICATIONS
HOME AUDIO SYSTEM
9-896-262-01
2016A33-1
©
2016.01
US Model
Canadian Model
Ver. 1.0 2016.01
Model Name Using Similar Mechanism NEW
Mechanism Type TDL-5W
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
Left/Right Channel:
driven, from 120 –
RMS power, with no more than
0.7% total harmonic distortion from
Amplifier section
The following are measured at
AC 120 V – 240 V, 50/60 Hz
Power Output (rated):
120 W (at 3 ohms, 1 kHz, 1% THD)
RMS output power (reference):
470 W (1 kHz)
Speaker section
Speaker system:
T Woofer
Tweeter L/R:
Woofer:
Inputs
AUDIO/PARTY CHAIN IN L/R:
MIC 1, MIC 2:
Sensitivity 1 mV, impedance
Outputs
AUDIO/PARTY CHAIN OUT L/R:
With 3 ohms loads, both channels
10, 000 Hz; rated
30 w atts per channel minimum
250 milliw atts to rated output.
50 mm (2 in), cone type
Voltage 2 V, impedance 10 kilohms
10 kilohms
V V, impedance 600 ohms oltage 2
cone type
200 mm (7 in),
Disc player section
System:
Compact disc and digital audio
system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6μW
* This output is the value
measurement at a distance of
200mm from the objective lens
surface on the Optical Pick-up Block
with 7mm aperture.
USB section
(USB) port:
Supported audio formats (MP3
discs and USB devices only)
Supported bit rate:
Sampling frequencies:
MP3 (MPEG1 Audio Layer-3):
32/44.1/48 kHz
WMA*: 44.1 kHz
* USB devices only
Tuner section
FM stereo
FM superheterodyne tuner
Antenna:
FM lead antenna
FM tuner section:
Tuning range:
87.5 MHz 108.0 MHz (100 kHz step)
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m (33 feet)
1)
Frequency band:
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method:
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles 2) :
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
SPP (Serial Port Profile)
Supported codecs:
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
LDAC
1)
The actual r ange will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, antenna’s
performance, operating system, software
application, etc.
2) BL UETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
Type A, maximum current 1 A
MP3 (MPE G1 Audio Layer-3): 32 kbps
320 kbps, VBR
WMA*: 32 kbps 192 kbps, VBR
General
Power requirements:
AC 120 V, 60 Hz
Power consumption:
Standby power consumption (at the
Standby Mode):
When BLUETOOTH standby mode is
set to off: 0.5 W (eco mode)
When BLUETOOTH standby mode is
set to on: 2.8 W (all wireless network
ports on)
Dimensions (W/H/D) (Approx.):
Mass (Approx.):
Quantity of the system:
1 piece
Supplied accessories:
Remote control (1)
R03 (size AAA) batteries (2)
FM lead antenna (1)
AC power cord (1)
Design and specifications are subject to
change without notice.
45 W
290 mm × 600 mm × 265 mm
65 W × 2 (at 2 ohms, 1 kHz, 1% THD)