10
GB
Positioning the speakers
(MHC-RV60 only)
1
Place the front speakers at an angle of
45 degrees from your listening
position.
2
Place the surround speakers facing
each other at about 60 to 90 cm above
your listening position.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
M
or
m
repeatedly to set the hour.
4
Press
,
.
5
Press
M
or
m
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
M
or
m
to select “CLOCK SET”, then
press ENTER.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode.
Front speaker (R)
Surround speaker (L)
Surround speaker (R)
Front speaker (L)
Surround speaker
60 to 90 cm
Setting the clock
