model name [MHC-GZX88D/GZX55D/GZX33D]
[4-449-370-
12
(2)] GB
53
GB
filename[D:\NORM'S JOB\SONY HA\SO130014\MHC-GZX88D_55D_33D (PMRF
02)\4449370122_GB\090INF.fm]
masterpage:Right
Ad
di
tio
n
a
l In
fo
rm
at
io
n
NO MUSIC
MP3/WMA/AAC data does not exist in
MUSIC playback mode.
NO PHOTO
JPEG data does not exist in PHOTO
playback mode.
NO STEP
All of the programmed steps have been
erased.
NOT IN USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
NOT SUPPORTED
An unsupported USB device is connected
or the USB device is connected through a
USB
hub.
NO VIDEO
MPEG4/Xvid data does not exist in
VIDEO playback mode.
OFF TIME NG
The on time and off time of Play Timer or
Recording Timer is the same.
PROTECTED
The USB device is write-protected.
PUSH STOP
You have pressed the buttons whose
operation is only possible when playback
is stopped.
READING
The system is reading information of the
disc or USB device. Some operations are
not available.
REC ERROR
The transfer did not start, stopped
partway, or otherwise could not be
performed.
STEP FULL
You tried to program more than 25 steps.
TRACK FULL
You cannot transfer onto the USB device
because the number of file has reached its
maximum.
Precautions
When carrying the unit
Perform the following procedure to
protect the disc mechanism.
Use the buttons on the unit to perform this
operation.
1
Press
"/1
to turn on the system.
2
Press DVD/CD.
3
Remove the disc.
Press
Z
OPEN/CLOSE to open and
close the disc tray.
Wait until “NO DISC” appears in the
display panel.
4
Hold down DVD/CD and FLANGER
for 3 seconds.
“MECHA LOCK” appears in the
display panel.
5
Unplug the power cord.
Notes on discs
• Before playing, wipe the disc with a cleaning
cloth from the center outward to the edge.
• Do not clean discs with solvents, such as
benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
On safety
• Completely disconnect the power cord (mains
lead) from the wall outlet (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.
• Should any solid object or liquid get into the
system, unplug the system, and have it
checked by qualified personnel before
operating it again.
• AC power cord must be changed only at the
qualified service shop.
Summary of Contents for MHC-GZX33D
Page 63: ......
