model name [MHC-GZX88D/GZX55D/GZX33D]
[4-449-370-
12
(2)] GB
39
GB
filename[D:\NORM'S JOB\SONY HA\SO130014\MHC-GZX88D_55D_33D (PMRF
02)\4449370122_GB\070TUN.fm]
masterpage:Right
Blu
e
tooth
You can operate a
Bluetooth
device by
connecting the system and a
Bluetooth
device using AVRCP.
Check the following before playing
music:
– The
Bluetooth
function of the
Bluetooth
device is turned on.
– Pairing has been completed.
x
For a
Bluetooth
device
1
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
2
Establish connection with the
Bluetooth
device.
The last connected
Bluetooth
device
will be connected automatically.
Perform the
Bluetooth
connection
from the
Bluetooth
device if the device
is not connected.
Once the connection is established, the
Bluetooth
device name appears in the
display panel.
3
Press
N
.
Depending on the
Bluetooth
device,
– you may have to press
N
twice.
– you may need to start playback of an
audio source on the
Bluetooth
device.
Notes
• When the system is not connected to any
Bluetooth
device, the system will connect and
playback from the last connected
Bluetooth
device automatically when you press
N
.
• If you try to connect another
Bluetooth
device
to the system, the current connected
Bluetooth
device will be disconnected.
x
For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system to establish the
Bluetooth
connection.
Start playback of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.
To disconnect the
Bluetooth
device
x
For a
Bluetooth
device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display
panel.
Depending on the
Bluetooth
device, the
Bluetooth
connection may be canceled
automatically when you stop playback.
x
For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system again.
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
If the system is connected to a
Bluetooth
device, the
Bluetooth
device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth
device.
2
Hold down ENTER and PHASER
for about 3 seconds.
“PAIR HISTORY” and “CLEAR”
appear in the display panel and all the
pairing information is erased.
Playing music from a
Bluetooth
device
Erasing all the pairing
registration information
Summary of Contents for MHC-GZX33D
Page 63: ......
