42
GB
MHC-V77DW.GB.4-596-076-
13(1)
5
Select “MHC-V77DW” on the
display of the BLUETOOTH
device.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 3.
Note
If passkey is required on the
BLUETOOTH device, enter “0000”.
“Passkey” may be called “Passcode”,
“PIN code”, “PIN number”, or
“Password”.
6
Establish connection with the
BLUETOOTH device.
When pairing is completed and the
BLUETOOTH connection is
established, BLUETOOTH device
name appears on the display.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
You can check the BLUETOOTH
device address by pressing DISPLAY
repeatedly.
Note
•
•
You can pair up to 9 BLUETOOTH
devices. If the 10th BLUETOOTH device
is paired, the oldest paired device will
be deleted.
•
•
If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel the pairing operation
Touch and hold PAIRING on the
unit for 2 seconds or more until “BT
AUDIO” appears on the display.
Listening to music on a
BLUETOOTH device
You can operate a BLUETOOTH
device by connecting the system
and the BLUETOOTH device using
AVRCP.
Check the following before playing
music:
•
—The BLUETOOTH function of the
BLUETOOTH device is turned on.
•
—Pairing has been completed
Once the system and the
BLUETOOTH device are connected,
you can control playback by
pressing
,
,
,
/
and
/
.
1
Touch BLUETOOTH on the unit to
select the BLUETOOTH function.
“BT AUDIO” appears on the display.
2
Perform a BLUETOOTH
connection with the BLUETOOTH
device.
Touch BLUETOOTH on the unit to
connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH connection
from the BLUETOOTH device if the
device is not connected.
Once the connection is established,
the BLUETOOTH device name
appears on the display.
3
Touch
to start playback.
Depending on the BLUETOOTH
device,
— you may need to touch
twice.
— you may need to start playing an
audio source on the BLUETOOTH
device.