T
a
p
e
–
P
lay
b
a
ck
15
GB
3
Turn and hold
.
OPERATION DIAL
>
clockwise or counterclockwise
and release it when you reach the
preset station you want (or press –
.
or
>
+ on the remote repeatedly to
select the preset station you want).
Listening to a non-preset
radio station
— Manual Tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press TUNING MODE on the remote
repeatedly until “MANUAL” lights up in
the display.
3
Turn and hold
.
OPERATION DIAL
>
clockwise or counterclockwise
and release it when you reach the radio
station you want (or press –
.
or
>
+ on the remote repeatedly to tune
in the radio station you want).
Tips
• When an FM stereo program has static noise, press
FM MODE on the remote repeatedly until “MONO”
lights up in the display. There will be no stereo effect,
but the reception will improve.
• To record the radio programs, see “Recording on a
tape manually” (page 17) or “Timer recording radio
programs” (page 22).
• You can also press FUNCTION on the remote
repeatedly to select “TUNER”.
• To improve broadcast reception, adjust the supplied
antennas, or connect an external antenna.
1
Press
Z
PUSH (Deck A) or
Z
PUSH
(Deck B) on the selected deck.
2
Load a tape into Deck A or B.
3
Push the center of the tape lid to close
the deck.
You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B (or TAPE on the
remote) repeatedly until “TAPE A” or
“TAPE B” appears in the display.
3
Press DIRECTION repeatedly to select
One Way Play to play back the front
side of the selected deck or Relay Play
*
to play back both decks in succession.
4
Press
N
.
The tape starts playing.
*
“RELAY” lights up in the display. Relay Play
follows this sequence, then stops:
Deck A (front side)
t
Deck B (front side)
GROOVE
A
TUNED
PRESET
STEREO
MHz
B
Frequency
Preset number
Tape – Playback
Loading a tape
Playing a tape
t
PUSH
Push here
to eject the
tape deck
With the side
you want to
play back or
record facing
forward
GROOVE
A
B
Tape presence indicator
continued
