12
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play back.
You can synchro record the programmed tracks
into a tape (page 16).
Use buttons on the remote for the operation.
1
Press CD.
2
When playback is stopped, press PLAY
MODE repeatedly until “PGM” lights up
in the display.
3
Press DISC SKIP repeatedly to select a
disc you want.
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
To program all the MP3 audio tracks on
an album at once, press ALBUM +/–
repeatedly until the album you want
appears in the display, then proceed to
step 5.
4
Press –
.
or
>
+ repeatedly until
the track number you want appears in
the display.
The total playing time flashes in the display.
When programming an MP3 audio track,
press ALBUM +/– repeatedly until the
album you want appears in the display, then
press –
.
or
>
+
repeatedly until the
track number you want appears in the
display.
5
Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
6
To program additional discs or tracks.
7
Press
N
.
Program Play starts.
Other operations
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
N
to play back the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Creating your own
program
— Program Play
GROOVE
PGM
A
B
Track
number
Total playing time
(including selected
track)
Disc tray
number
To program
Repeat steps
Other discs
3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To
Do this
Cancel Program
Play
When playback is stopped, press
PLAY MODE repeatedly until
“PGM” disappear from the
display.
Clear a track from
the end of program
Press CLEAR when playback is
stopped.
