![background image](http://html.mh-extra.com/html/sony/mhc-gn1300d/mhc-gn1300d_operating-instructions-manual_1329994051.webp)
model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
51
GB
Di
sc
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB06CDP.fm]
masterpage:Right
LEVEL (FRONT)
5)
Be sure to set “TEST TONE” to “ON” for
easy adjustment.
L 0.0 dB:
Set this between -6.0 dB and
0.0 dB in 1.0 dB increments.
R 0.0 dB:
Set this between -6.0 dB and
0.0 dB in 1.0 dB increments.
CENTER 0.0 dB:
Set this between
-6.0 dB and +6.0 dB in 1.0 dB increments.
SUBWOOFER 0.0 dB:
Set this between
-6.0 dB and +6.0 dB in 1.0 dB increments.
Depending on the subwoofer, the sound
output may be smaller compared to other
speakers when you adjust this level during
the test tone.
LEVEL (SURROUND)
6)
You can adjust the level of each surround
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
L 0.0 dB:
Set this between -6.0 dB and
+6.0 dB in 1.0 dB increments.
R 0.0 dB:
Set this between -6.0 dB and
+6.0 dB in 1.0 dB increments.
TEST TONE
7)
OFF:
The test tone is not emitted from the
speakers.
ON:
The test tone is emitted from each
speaker in sequence.
The test tone is emitted from the selected
speakers when you select “LEVEL
(FRONT)” or “LEVEL (SURROUND)”.
1
Press
V
/
v
/
B
/
b
repeatedly to
select the speaker or level you
want.
2
Press ENTER.
3
Repeat steps 1 and 2 to adjust the
speaker level for other speakers.
Press
V
/
v
/
B
/
b
repeatedly to set
“TEST TONE” to “OFF” when you
have finished adjusting the speaker
level.
1)
Depending on the settings of other speakers,
the subwoofer may output excessive sound.
2)
The items that are set to “NONE” in
“CONNECTION” cannot be selected.
Depending on the input stream, the
“DISTANCE” setting may not be effective.
When you perform “QUICK” setup
(page 23), the default settings are changed.
3)
If each left and right speakers are not placed at
an equal distance from your listening position,
set the distance according to the closest
speaker.
4)
The setting range changes depending on the
front speaker setting.
5)
The items that are set to “NONE” in
“CONNECTION” cannot be selected.
6)
This setting cannot be selected when
“SURROUND” is set to “NONE” in
“CONNECTION”.
7)
When you adjust the speaker settings, the
sound may cut off for a moment.