Sony MHC-GN1100D, Operating Instructions Manual

Page: 64 / 96

64 GB
Using the timer
— Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP repeatedly.
The minute display (turn-off time)
changes.
Tip
To check the remaining time, press SLEEP once.
— Play Timer/Recording Timer
You cannot activate both the Play Timer
and the Recording Timer at the same
time. Make sure you have set the clock.
Play Timer:
You can wake up to music at a preset time.
Recording Timer:
You can record from a preset radio station
at a specified time.
1
Prepare the sound source.
For Play Timer:
Load a disc or a tape with the side you
want to play back facing forward or
tune in the preset station you want.
Then press /– (or turn
MASTER VOLUME on the unit) to
adjust the volume.
For Recording Timer:
Tune in the preset radio station you
want.
2
Press TIMER MENU.
3
Press
V
or
v
repeatedly to
select “PLAY SET?” or “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start playback or
recording.
Press
V
or
v
repeatedly to set the
hour, then press ENTER.
The minute indication flashes in the
display. Use the procedure above to set
the minute. “OFF” appears and the
hour indication flashes in the display.
5
Set the time to stop playback or
recording using the same
procedure as step 4.
6
Select the sound source or
prepare the tape.
For Play Timer:
Press
V
or
v
repeatedly until the
music source you want appears in the
display, then press ENTER. The
display will show the timer settings.
For Recording Timer:
The display will show the timer
settings. Load a recordable tape into
Deck B. Press DIRECTION on the
unit repeatedly to select “
g ” to
record on one side or “
j
” (or
“RELAY”) to record on both sides.
When recording from the reverse side,
press FU/– (or TAPE A/B
on the unit) repeatedly to select “TAPE
B”. Then, press
H
(or
nN
on the
unit) repeatedly until the TAPE B
reverse side indicator lights up to start
playback of the reverse side. Press
x at
the point where you want to start
recording.
When you record on both sides, be sure
to start from the front side. If you start
from the reverse side, recording stops
at the end of reverse side.
Other Operations
Falling asleep to music
Setting the timer