Sony MHC-GN1100D, Operating Instructions Manual

Page: 51 / 96

51 GB
Disc
SUBWOOFER
2)
:
YES: Normally select this.
NONE: Select this if the subwoofer is not
connected.
DISTANCE
3)
FRONT 3.0 m
4)
: Front speaker distance
from the listening position can be set in
0.2 meter increments from 1.0 to 7.0
meters.
CENTER 3.0 m
5)
: Center speaker
distance from the listening position can be
set in 0.2 meter increments from 0.0 to 7.0
meters.
SURROUND 3.0 m
4)5)
: Surround
speaker distance from the listening
position can be set in 0.2 meter
increments from 0.0 to 7.0 meters.
LEVEL (FRONT)
6)
Be sure to set “TEST TONE” to “ON” for
easy adjustment.
L 0.0 dB: Set this between -6.0 dB and
0.0 dB in 1.0 dB increments.
R 0.0 dB: Set this between -6.0 dB and
0.0 dB in 1.0 dB increments.
CENTER 0.0 dB: Set this between
-6.0 dB and +6.0 dB in 1.0 dB increments.
SUBWOOFER 0.0 dB: Set this between
-6.0 dB and +6.0 dB in 1.0 dB increments.
Depending on the sub woofer, the sound
output may be smaller compared to other
speakers when you adjust this level during
the test tone.
LEVEL (SURROUND)
7)
Be sure to set “TEST TONE” to “ON” for
easy adjustment.
L 0.0 dB: Set this between -6.0 dB and
+6.0 dB in 1.0 dB increments.
R 0.0 dB: Set this between -6.0 dB and
+6.0 dB in 1.0 dB increments.
TEST TONE
8)
OFF : The test tone is not emitted from the
speakers.
ON: The test tone is emitted from each
speaker in sequence.
The test tone is emitted from the selected
speakers when you select “LEVEL
(FRONT)” or “LEVEL (SURROUND)”.
1
Press
V
/
v
/
B
repeatedly to select
the desired speaker or the level.
2
Press ENTER.
3
Repeat steps 1 and 2 to adjust the
speaker level for other speakers.
Press
V
/
v
/
B
repeatedly to set
“TEST TONE” to “OFF” when you
have finished adjusting the speaker
level.
1)
To return to the default setting when changing
a setting, press CLEAR before you press
ENTER. However, you cannot return the
setting of “CONNECTION” to default
setting.
Note that you cannot perform SPEAKER
SETUP when you connect headphones or
microphones to the unit.
2)
Depending on the settings of other speakers,
the subwoofer may output excessive sound.
3)
The items that are set to “NONE” in
“CONNECTION” cannot be selected.
Depending on the input stream, the
“DISTANCE” setting may not be effective.
When you perform QUICK SETUP
(page 23), the default settings are changed.
4)
If each left and right speakers are not placed at
an equal distance from your listening position,
set the distance according to the closest
speaker.
5)
The setting range changes depending on the
front speaker setting.
6)
The items that are set to “NONE” in
“CONNECTION” cannot be selected.
7)
This setting cannot be selected when
“SURROUND” is set to “NONE” in the
“CONNECTION” setting.
8)
When you adjust the speaker settings, the
sound may cut off for a moment.