Tu
n
e
r
45
GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them first (see “Presetting radio stations” on
page 43).
1
Press FU/– repeatedly until
“TUNER” appears in the display (or
press TUNER/BAND on the unit).
2
Press BAND (or TUNER/BAND on the
unit) repeatedly to select “FM” or
“AM”.
3
Press TUNING MODE repeatedly until
“PRESET” lights up in the display.
4
Press /– repeatedly (or turn
–
. >
+ clockwise or
counterclockwise on the unit) to select
the preset station you want.
Listening to non-preset radio
station
— Manual Tuning
1
Press FU/– repeatedly until
“TUNER” appears in the display (or
press TUNER/BAND on the unit).
2
Press BAND (or TUNER/BAND on the
unit) repeatedly to select “FM” or
“AM”.
3
Press TUNING MODE repeatedly until
“MANUAL” lights up in the display.
4
Press /– repeatedly (or turn
–
. >
+ clockwise or
counterclockwise on the unit) to tune
in the station you want.
Tips
• For preset tuning, you can use numeric button to
select a preset station. Press >10, then press numeric
button to enter the preset number over 10.
• To improve broadcast reception, adjust the supplied
antennas or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” lights up in
the display. There will be no stereo effect, but the
reception will improve.
• To record the radio programs, see “Recording on a
tape manually” (page 48) or “Timer recording radio
programs” (page 59).
Listening to the radio
MHz
STEREO
TUNED PRESET
GROOVE
EFFECT
j
Y
Y
A
B
Frequency
Preset number