Sony MG40 Series, Command Reference Manual

Page: 121 / 140

(E)
4-33
MG40 Series

Command response
Th is function is used to set whether or not the execution results are to be returned in response to each
command.
Even when it is set to “no response,” the response to the CRP command itself is returned.
Set
Setup
mode
Ethernet CC-Link
The command sets whether to return the execution results in response to each command.
Command format
CRP=<Value>
<Value> 0 : No response
1 : Response (Factory setting)
Return format Execution results
Target MG41 main unit
Save setting values Setting values saved.
Examples of use Transmission :
CRP=0
Return : OK000
Transmission :
CRP=1
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet CC-Link
Measurement
mode
The command acquires whether or not the execution results are to be returned.
Command format
CRP?
Return format CRP=<Value>
<Value> 0 : No response
1 : Response
Target MG41 main unit
Examples of use Transmission :
CRP?
Return : CRP=1
Compatible command None