Sony MEXDV2200 - DVD/SACD/CD Receiver, Operating Instructions Manual

Page: 35 / 192

35
The setting is configurable both from the visual
setup menu (page 41) and the system setup menu
(page 45).
The options for “SUPER AUDIO CD LAYER”
(visual setup) and “DISC.LAYER” (system
setup) are indicated below.
MULTI (visual setup)/ MLT (system setup): Plays
the multi-channel area in the Super Audio CD
layer.
2CH : Plays 2-channel (stereo) area in the Super
Audio CD layer.
CD : Plays the CD layer.
By the visual setup menu
1
Press (VISUAL SETUP) while the unit is
off.
The visual setup menu appears.
2
Press
M
/
m
to select (AUDIO
SETUP), then press (ENTER) .
The audio setup items appear.
3
Press M / m to select “SUPER AUDIO
CD LAYER,” then press
(ENTER)
.
The options appear.
4
Press M / m to select “MULTI,” “2CH,” or
“CD,” then press
(ENTER)
.
The setting is complete.
To return to the previous display, press O .
To hide the visual setup menu, press
(VISUAL SETUP) .
By the system setup menu
1
Press (SYSTEM SETUP) while the unit is
off.
The system setup item appears.
2
Press
M
/
m
to select “DISC.LAYER,”
then press (ENTER) .
The option appears.
3
Press M / m to select “MLT,” “2CH,” or
“CD,” then press (ENTER) .
The setting is complete.
To hide the system setup display, press
(SYSTEM SETUP)
.
Note
For Super Audio CDs consisting of only a Super Audio
CD layer, that layer is played regardless of setting.
Tip
The setting in visual setup will switch the setting in
system setup automatically, and vice versa.
Selecting the sound quality
This unit allows you to change the sound quality
of Super Audio CD playback by switching the
sampling frequency.
The setting is configurable both from the visual
setup menu (page 41) and the system setup menu
(page 45).
The options for “SUPER AUDIO CD MODE”
(visual setup) and “SA-CD MOD” (system
setup) are indicated below.
HQ : Outputs at 176.4 kHz (high sound quality).
STD : Outputs at 44.1 kHz (standard CD sound
quality).
By the visual setup menu
The setting procedure is the same as for setting
the playback layer (page 34).
Press
(VISUAL SETUP)
, then select “AUDIO
SETUP” c “SUPER AUDIO CD MODE” c
“HQ” or “STD.”
By the system setup menu
The setting procedure is the same as for setting
the playback layer (page 34).
Press
(SYSTEM SETUP)
, then select “SA-CD
MOD” c “HQ” or “STD.”
Note
When set to “HQ,” EQ7 (page 36), CSO (page 37),
Intelligent Time Alignment (page 37) and HPF/LPF
(page 48) settings are deactivated. To activate, set to
“STD.”
Tip
The setting in visual setup will switch the setting in
system setup automatically, and vice versa.
AUDIO SETUP
SUPER AUDIO CD MODE:
SUPER AUDIO CD LAYER :
POSITION SELECT :
AUDIO DRC :
5.1CH OUTPUT :
PROLOGIC II : HQ
MULTI
MULTI
2CH
CD
OFF