32
GB
Installation
Before installing the unit, remove the protection
collar
and the bracket
from the unit.
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys
until they
click, and pull down the bracket
, then
pull up the unit to separate.
Before installing, make sure the catches on both
sides of the bracket
are bent inwards 2 mm (
3
/
32
in).
1
Position the bracket
inside the
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket
, then
attach the protection collar
.
Notes
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
For details, see “Detaching the Front Panel”
(page 6).
For details, see “Resetting the unit” (page 7).
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Note
Use an appropriate tool to replace a fuse.
Removing the protection collar and the
bracket
Mounting the unit in the dashboard
Face the hook inwards.
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
Detaching and attaching the front panel
Resetting the unit
Fuse replacement
Fuse (15 A)