50
Setting the clock
The clock uses a 12-hour indication.
1
Press
.
The system setup item appears on the
main unit.
2
Press
/
to select “CLOCK-ADJ,”
then press
.
The hour indication flashes.
3
Press
/
to set the hour and minute.
To move the digital indication, press
/
.
4
Press
.
The setting is complete.
To hide the system setup display, press
.
To show the clock during playback, press
repeatedly until it appears.
With the main unit
Press and hold the control dial instead of pressing
, rotate the control dial
instead of pressing
/
, press
–/+
instead of
/
, press the control dial instead
of
.
Using Optional
Equipment
Auxiliary equipment
You can connect auxiliary devices to the
unit, and listen on your car speakers.
Up to 2 devices can be connected, one to the
AUX input jack (stereo mini jack) on the
front, and the other to the AUX AUDIO IN
terminals on the rear. The volume level is
adjustable for any difference between the
unit and the auxiliary device.
Connecting an auxiliary device
1
Turn off the auxiliary device.
2
Turn down the volume on the unit.
3
Connect to the unit.
On the front
Connect to the AUX input jack.
* Be sure to use a straight type plug.
On the rear
Connect to the AUX AUDIO IN terminals.
Selecting an auxiliary device
1
Press
repeatedly until “AUX”
appears on the main unit.
2
Press
to select “FRONT-IN” or
“REAR-IN.”
Operate by the auxiliary device itself.
Connecting cord
*
(not supplied)