19
Playing an iPod
In this manual, “iPod” is used as a general reference for the iPod functions on the iPod and
iPhone, unless otherwise specified by the text or illustrations.
With the card remote commander
Use
instead of
,
+/– instead of the control dial.
To stop playback
Press
for 1 second.
With the card remote commander, press
.
1
Connect the iPod to the USB connector.
Use of the optional USB connection cable RC-
202IPV is recommended.*
1
The following display appears on the iPod screen*
2
,
then playback starts from the item last played.
If an iPod is already connected, to start playback,
press
repeatedly until “USB”
appears. (“IPD” appears when iPod is recognized.)
*1
To play videos of iPod with video, use of the RC-202IPV is required.
*2
May not appear in the case of an iPod touch or iPhone being
connected, or that iPod was last played back using passenger
control.
2
Press
repeatedly until the desired play mode appears.
The mode changes as follows:
RESUMING
*
1
ALBUM
TRACK
GENRE
PLAYLIST
ARTIST
PODCAST
*
2
*1
Appears only when the iPod currently playing is connected.
*2
May not appear depending on the iPod setting.
3
Adjust the volume by rotating the control dial.
OFF
MODE
VOL
SRC
ENTER
M/m
SOURCE / OFF
MODE
Control dial
