13
Basic Operations
Listening to the radio
Tip
For details on other radio functions, see “Advanced Operations — Radio” on page 21.
With the card remote commander
Use
instead of
, and
/
instead of
–/+.
1
Press
repeatedly until “TUNER” appears.
2
Press
repeatedly until the desired band (FM1, FM2, FM3, AM1
or AM2) appears.
3
Perform tuning.
To tune automatically
Press
+/–.
Scanning stops when the unit receives a station. Repeat this procedure until the desired
station is received.
To tune manually
Press and hold
+/– to locate the approximate frequency, then press
+/– repeatedly to fine adjust to the desired frequency.
.m/M>
MODE
SRC
SOURCE / OFF
SEEK
MODE
