Adjustment Using the Menus
26
USER CONFIG menu
You can select a language, etc.
x
M AT R I X
xxx
· C O M P L E V E L
xxxxx
· N T S C S E T U P
x
· G A M M A
x
· F O R M AT D I S P
xxx
· L A N G U A G E
xxx
· A U D I O I N
xxxxxxxx
· P O W E R S AV I N G
xx
U S E R C O N F I G ( 1 / 2 )
R r
x
M A R K E R
xxx
· C E N T E R M A R K E R
xxx
· S A F E T Y A R E A
xxx
· M A R K E R L E V E L
x
· M A R K E R M AT
xxx
· P I C D E L AY M I N
xxx
· S C A N
xxxx
U S E R C O N F I G ( 2 / 2 )
R r
Submenu
Setting
MATRIX
Applied to 480/60I or 480/60P
signal. Select 601 or 709.
COMP LEVEL
Select the component level from
among three modes.
•
SMPTE
for 100/0/100/0 signal
•
BETA 0
for 100/0/75/0 signal
•
BETA 7.5
for 100/7.5/75/7.5
signal
NTSC SETUP
Select the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
GAMMA
Selects the appropriate gamma
mode. You can select from among
5 settings. When “3” is selected,
the setting is roughly same as the
gamma mode of the CRT (2.2).
FORMAT DISP
Select the display mode of the
signal format and scan mode.
•
ON
: The mode is always
displayed.
•
OFF
: The display is hidden.
•
AUTO
: The format is displayed
for about 10 seconds and
scan mode is displayed for
about 3 seconds when the
input of the signal begins.
LANGUAGE
You can select the menu or message
language from among seven
languages.
•
ENGLISH:
English
•
DEUTSCH:
German
•
FRANÇAIS:
French
•
ITALIANO:
Italian
•
ESPAÑOL:
Spanish
•
:
Japanese
•
:
Chinese
AUDIO IN
Selects an audio channel.
•
ALL:
when an analog signal is
input, the sound is always
output.
•
COMPOSITE:
when the
COMPOSITE button is pressed,
the sound is output.
•
Y/C:
when the Y/C button is
pressed, the sound is output.
•
RGB/COMPONENT:
when
the RGB or COMPONENT
button is pressed, the sound is
output.
POWER SAVING
Sets the power saving mode on or
off. When set to ON, the monitor
goes into power saving mode if no
signal is input for about one minute.
