Pl
ay
in
g
M
Ds
masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
17
1)
Automatic Music Sensor
2)
When you locate a point while monitoring the
sound.
3)
When you locate by observing the time
indication.
Tips
•
While playing an MD recorded in LP2 or LP4
Stereo mode, the MD LP indicator lights up when
you press
NX
in step 5 above.
•
To use headphones, connect them to the PHONES
jack. Turn PHONE LEVEL to adjust the
headphones level.
•
When “– Over –” appears in the display, the MD has
reached the end while you’re pressing
M
. Turn
AMS counterclockwise (or press
.
) or press
m
to go back.
Playing a track by entering the track
number
Press the number button(s) on the remote
to enter the track number of the track you
want to play.
To enter a track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
•
To play track number 30, press >10, then 3 and
10/0.
•
To play track number 108, press >10 twice, then
1, 10/0, and 8.
Using the MD display
To change the display during playing, press
DISPLAY on the remote repeatedly.
Each press of the button changes the display
cyclically as follows:
Track number and elapsed time of the current
track
t
Track number and remaining time of
the current track
t
Remaining time of all
recorded tracks
t
The contents of a program
(only when “PGM” lights up)
t
Track name
1)
Tip
To check the track name while playing (only when the
track name is recorded)
,
press SCROLL on the
remote.
The track name appears and scrolls. While the track
name is scrolling, press the button again to pause
scrolling, and again to continue scrolling.
To change the display in stop mode, press
DISPLAY repeatedly.
Each press of the button changes the display
cyclically as follows:
Total number of tracks and total recorded
time
t
Remaining recordable time
2)
on the
MD (recordable MDs only)
t
The contents of
a program (only when “PGM” lights up)
t
Total playing time of the program (only when
“PGM” lights up)
t
Disc name
1)
1)
“No Name” appears when the disc has no name.
2)
Time shown in the display differs depending on
the setting of REC MODE.
Find a point in a track
Press and hold
M
or
m
during play
2)
or play pause
3)
and release it at the desired
point.
Eject the MD
Z
after stopping play
To
Press or turn
