52
Labeling a track or a disc during recording
1
While recording, press EDIT for 2 seconds or more so that
“EDIT” flashes in the display, and then press ENTER (
x
).
“
: Name” flashes in the display.
2
To label a track, press ENTER (
x
) again.
To label a disc, press
.
or
>N
repeatedly until
“
: Name” flashes in the display, then press ENTER (
x
).
The track or disc is ready to be labeled.
3
Follow steps 4 to 6 of “Labeling a disc during stop” (page 50).
To cancel labeling, press EDIT for 2 seconds or more or press
T MARK.
Note
When the recording is stopped while labeling a track or a disc during
recording, or when the recording moves on to the next track while labeling a
track, the input at that point is entered automatically.
Available characters
•
Capital and small letters of the English alphabet
•
Numbers 0 to 9
•
!
" # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
Relabeling recordings
Follow the steps corresponding to the labeling method until the disc
or track is ready to be labeled. Enter a new character over the one you
want to change, then press ENTER (
x
for 2 seconds or more on the
remote control).
Notes
•
You cannot relabel premastered MDs or label MDs that have not been
recorded.
•
The recorder is able to display, but cannot label using Japanese “Katakana”
characters.
•
The recorder cannot rewrite a disc or track name of more than 200 letters that
was created by another device.