Sony MCS-8M, Operating Instructions Manual

Page: 31 / 64

II-31
Overview / Details on [Audio Channel] Menu
Chapter
C
h
ap
te
r 3
A
u
dio
Mi
xin
g
Audio Mixing
Overview
You can adjust the audio input in detail, set the audio levels, and specify the connectors to use for audio output for each
audio channel.
Adjust and set the audio from the [Audio Channel] menu for each audio channel.
To display the [Audio Channel] menu
Press the ACCESS/PFL button in the same column as the channel fader assigned to the audio channel you want to adjust.
For details on assigning an input signal to each channel fader, see “Assigning Audio Input Signals to the Channel Faders” ( c Basic Operation).
Details on [Audio Channel] Menu
ACCESS/PFL buttons
Menu item Description Knob Parameter Meaning Setting range Reference
page
Input Trim Adjust the audio input signal levels. You
can individually adjust the assigned
channels of the audio signals input to this
unit. V4 Level Adjusts input
level –15 dB to
+15 dB (
0 dB )
–
Filter Cut high frequency and low frequency.
Use these settings to suppress noise,
etc. V3 L Cut Cuts low
frequency
(100 Hz or less) Off , On –
V4 H Cut Cuts high
frequency (8 kHz
or more) Off , On