Sony MCE-K700, Service Manual

Page: 17 / 66

— 17 —
Note: Follow the disassembly procedure in the numerical order given.
4-1. FRONT PANEL
• In order to remove the front panel block when the power supply
does not turn on, rotate the cam with tapering driver as the figure
shows, and the disc table will be moved.
Then pull out the disc table by your hand to remove the loading
panel as the figure shows. After that take out the front panel block.
SECTION 4
DISASSEMBLY
4-2. BASE UNIT (BU-5BD21)
Tapering driver
Loading panel
1
Turn the cam to the direction of
arrow (counter clock wise)
by tapering driver.
BU-5BD21
2
Take off the disc table.
3
Yoke bracket
4
Remove the Base unit
(BU-5BD21) to the direction of
arrow.
Disc table