25
Use a camera cable (not supplied) to connect the
camera head to the CAMERA connector on the
CCU.
You can use one of the following four types of
camera cable.
CCMC-SA06 (standard 6 m (19.6 ft.))
CCMC-SA10 (standard 10 m (32.8 ft.))
CCMC-SA15 (standard 15 m (49.2 ft.))
CCMC-EA05 (extension 5 m (16.4 ft.))
Notes on using camera cables
• When disconnecting or connecting the camera
cable, be sure to turn off the power supply for
the CCU and all equipment connected to the
CCU. Doing so while the power is on may result
in malfunctions to the equipment.
• Make sure that the camera head and CCU are
connected via the camera cable before starting
the unit.
• Insert the connector by pushing it straight in,
taking care not to bend the pins.
• Make sure connectors are securely inserted. A
loose connection may result in noise. When
removing a connector, be sure to hold it by the
connector itself and not the cable.
1
Align the positioning marks on the
camera cable connector and the round
camera cable plug, and then push the
plug in.
2
Turn cable connector ring to tighten the
connection.
Note
Do not connect this unit to camera heads and
CCUs of different models.
1
Align the positioning marks on the
CAMERA connector and the round
camera cable plug, and then push the
plug in.
2
Turn cable connector ring to tighten the
connection.
Connection between the
Camera Head and CCU
Connecting the camera cable to
the camera head
Connector ring
Positioning marks
Connecting the camera cable to
the CAMERA connector on the
CCU
Connector ring
Positioning marks
