LED Bulb Speaker
LSPX-102E26
Pairing and connecting with a BLUETOOTH device
The bulb speaker can be paired with up to seven BLUETOOTH devices.
When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the bulb speaker, be sure to do the following:
Make sure that the battery in the remote control has power remaining.
Stop playback on a BLUETOOTH device to avoid sudden loud sound output from the bulb speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the light fixture to which the bulb speaker is installed.
The bulb speaker turns on.
1
Press and hold the
(play/pause)/
PAIRING button.
The bulb speaker will make a sound
*
to indicate that pairing mode has been entered. Release the button when the sound is
made.
(Playback may require the latest browser.)
When the BLUETOOTH device that was most recently connected is nearby, simply press the
(play/pause)/
PAIRING button, and the bulb speaker will automatically connect with the device that was previously connected. If you
want to connect with a different device, end the current connection by operating the connected BLUETOOTH device.
2
Perform the pairing procedure on the BLUETOOTH device to detect the bulb speaker.
When a list of detected devices appears on the display of the BLUETOOTH device, select “LSPX-102E26.”
If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”
3
8
