Sony LocationFree LF-X11, Operating Instructions Manual, Page: 84 / 96

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm masterpage: Left
LocationFreeTV
2-655-608-11(1)
84
When using a LAN connection, select
[Settings] next to On the Go-Wired LAN.
The [Wired Monitor Settings] window
appears.
5
Confirm that the check box of “Automatic IP
Address Configuration (DHCP)” is checked
and the IP Address is displayed.
6
When using a wireless connection, select
[Back].
[On the Go-Wireless] window appears, and
then select [Back].
When using a LAN connection, select
[Back].
The [Monitor] window reappears.
7
Select [Settings], and then select [Exit].
Connecting via LAN (assigning an
IP address manually)
1
Perform the steps 1 to 4 in “Connecting via
LAN (DHCP)” (
1
page 83).
When using a wireless connection, [Wireless
Monitor Settings] window appears.
When using a LAN connection, [Wired
Monitor Settings] window appears.
2
Clear the checks from the [Automatic IP
Address Configuration (DHCP)] and
[Automatic DNS Configuration] check
boxes. Then, while referring to the
information from your public wireless or
wired LAN service provider, enter values in
the [IP Address], [Subnet Mask], [Default
Gateway], [DNS1], and [DNS2] fields.
When you are finished, select [Set].
3
When using a wireless connection, select
[Back].
[On the Go-Wireless] window appears, and
then select [Back].
When using a LAN connection, select
[Back].
The [Monitor] window reappears.
4
Select [Settings], and then select [Exit].
Clear this check box.
Refer to the information from
your service provider. Set [Back]