![background image](http://html.mh-extra.com/html/sony/lbt-ztx7-compact-hi-fi-stereo-system/lbt-ztx7-compact-hi-fi-stereo-system_operating-instructions-manual_1329883036.webp)
36
GB
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS) is a
broadcasting service that allows radio
stations to send additional information
along with the regular program signal.
This tuner offers convenient RDS features
like station name. RDS is available only
on FM stations.*
* Not all FM stations provide RDS service, nor
do they provide the same types of services. If
you are not familiar with the RDS system,
check with your local radio stations for details
on RDS services in your area.
Note
RDS may not work properly if the station you
are tuned in is not transmitting the RDS signal
properly or if the signal is weak.
Receiving RDS broadcasts
Simply select a station from FM
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To check the RDS information
While receiving an RDS station,
press DISPLAY repeatedly.
RDS information appears on the display.
Recording onto a tape
There are three ways to record on a
TYPE I (normal) tape.
CD-TAPE Synchro Recording:
You can record an entire disc onto a tape.
The recording level is adjusted
automatically.
Manual Recording:
You can record just the portion you want
from a sound source, including connected
audio components.
Sound Mixing:
You can “mix” sound from any of the
sound sources and singing or speaking
into a microphone (not supplied). The
mixed sound can be recorded onto a tape.
1
Load a recordable tape into
tape deck.
Be sure to load the tape with the side
you want to record facing forward.
2
Prepare the recording source.
For CD-TAPE Synchro Recording:
Press CD and load the disc you want to
record.
• To record a folder of MP3 files, press
PLAY MODE on the remote
repeatedly until “
” lights up in the
display. Then, press
+/–
repeatedly to select the folder you
want.
• You can record tracks or files on all
the discs in the order you want using
Program Play. Perform steps 2 to 6 of
“Creating your own program”
(page 33). When programming,
make sure the playing times do not
exceed the length of one side of the
tape.