Sony LBT-XGR99AV Operating Instructions Manual Download Page 5

Page: 5 / 40

Ge
tting Star

Connect the surround speakers.

Connect the speaker cords to the
SURROUND SPEAKER jacks as shown
below.

Connect the FM and AM antennas.

Set up the AM loop antenna, then connect
it.

Note

Keep the antennas away from the speaker cords.

Connect the power cord to a wall
outlet.

The demonstration appears in the display.
When you press

?/1

, the system turns on

and the demonstration automatically ends.

If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).

You can cancel the demonstration by
pressing DISPLAY repeatedly (page 25).

Inserting two R6 (size AA)
batteries into the remote

Note

If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.

Tip

When the remote no longer operates the system,
replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom
of the center speaker and front speakers to
stabilize the speakers and prevent them from
slipping.

Front speaker (Left (4)/Right (4))
Center speaker (4)

CENTER

SURRO

UND

Black (

)

Gray (

)

Insert only the stripped portion

COA

XIA

Extend the FM lead
antenna horizontally

AM loop
antenna

continued

Summary of Contents for LBT-XGR99AV









































Search results

Summary of Contents for LBT-XGR99AV

Reviews:

Related manuals for LBT-XGR99AV

Brands by name

Popular brands

Sony LBT-XGR99AV, Operating Instructions Manual

Search results

Summary of Contents for LBT-XGR99AV

Reviews:

Related manuals for LBT-XGR99AV

Brands by name

Popular brands