CD –
Pla
y
9
GB
Other operations
Note
You cannot change the play mode during playback.
Tip
When switching to CD function from tuner by pressing
NX
(or CD
N
on the remote), a longer time may be
required to access the disc. In this case, set “CD
POWER ON” by CD power manage function
(page 12).
You can play all the tracks or a single track on a
disc.
Using the display window
Press REPEAT during playback until
“REPEAT” or “REPEAT1” appears.
REPEAT: For all the tracks on the disc up to
five times.
REPEAT1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both
“REPEAT” and “REPEAT1” disappear.
Note
You cannot select “REPEAT” and “ALL DISCS
SHUFFLE” at the same time.
To
Do this
Stop play
Press
x
.
Pause
Press
NX
(or
X
on the remote).
Press again to resume play.
Select a track
During play or pause, press
.
or
>
repeatedly.
Find a point in a
track
Keep pressing
m
or
M
during
playback and release it at the
desired point.
Select a disc
Press DISC 1 – 5 or DISC SKIP.
Switch to CD
function from
another source
Press DISC 1 – 5 or
NX
(or
CD
N
on the remote) (Automatic
Source Selection).
Remove a disc
Press PUSH OPEN, then press
DISC SKIP until the disc comes to
the front.
Adjust the
volume
Turn VOLUME (or press
VOL +/– on the remote).
Playing repeatedly
— Repeat Play
