background image

20

Menu Adjustment

Sony KV-AR212M30 Group G7 (

GB

)_2-109-122-11 (1)

x

Changing the “Timer” setting

The “Timer” menu allows you to set TV to turn off and turn on automatically.

1

Press MENU.

2

Press 

V

 or 

v

 to select the “Timer” icon (

),

then press 

.

3

Press 

V

 or 

v

 to select the desired item (e.g., “Sleep Timer”), then press 

.

Select

To

“Sleep Timer”

set TV to turn off automatically.
Press 

V

 or 

v

 to select the desired period of time (max. of 1 hour

and 30 minutes), then press 

.

“Wake Up Timer”

set TV to turn on automatically.
Press 

V

 or 

v

 to select the desired period of time (max. of 12

hours), then press 

.  After the selected length of time, the TV

switches on automatically and “Wake Up Timer” will appear on
the screen.
The   indicator on the TV lights up amber once you set the
“Wake Up Timer”.

Notes

• You can also cancel “Sleep Timer” and “Wake Up Timer” by turning off the TV’s main power.
• If no buttons or controls are pressed for more than one hour after the TV is turned on using

the “Wake Up Timer”, the TV automatically goes into standby mode.

Timer

Wake Up Timer:

Sleep Timer:

Off

Off

Confirm

End

Select

Summary of Contents for KV-AR212






























Reviews: