Quick Start Guide
4-090-013-
01
Checking the supplied
accessories
Batteries
Inserting batteries into
the remote control
Connecting the TV
2
Remote Control
Always remember to:
•
observe the correct polarity when inserting batteries,
•
dispose of batteries in an environmentally friendly way.
1.
Connect your aerial lead to the aerial socket labelled
8
on the rear of the TV.
Connecting an aerial only
1.
Connect your aerial lead to the IN* socket on your VCR.
2.
Connect an RF lead from the OUT* socket on your VCR to the aerial socket labelled
8
on the rear of the TV.
3.
Connect a fully wired 21-pin scart lead from the scart socket marked
i
3/
r
3 on the
rear of the TV to a scart socket on your VCR**
Notes
: *Socket names may vary depending on make and model of VCR. Refer to your
VCR instruction manual for details.
**If your VCR does not have a scart socket follow the connecting instructions above
ignoring the scart lead connection.
You will also need to manually tune the VCR to a spare TV channel (ideally channel
0, refer to the ‘Manual Programme Preset menu’ section of the main instruction
manual).
Connecting an aerial and VCR
KV-32FQ80U
Thank you for choosing this Sony
Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
VCR
VCR
TV
DVD
MODE
R/D/D/D L/G/S/I
ANALOGUE
1
2
DVD
VCR
s
3
3
(SMARTLINK)
s
4
4
DOLBY. THE DOUBLE-D SYMBOL D
ARE TRADEMARKS OF DOLBY
LABORATORIES
D
R/D/D/D L/G/S/I
ANALOGUE
1
2
DVD
VCR
s
3
3
(SMARTLINK)
s
4
4
DOLBY. THE DOUBLE-D SYMBOL D
ARE TRADEMARKS OF DOLBY
LABORATORIES
D
RF lead
(not supplied)
Scart lead
(not supplied)
1
3
2
3
1
KV-36FQ80U
