Sony KV-27FS17 - 27" Fd Trinitron Wega, Operating Instructions Manual, Page: 29 / 64

Using the Remote Control and Basic Functions
17
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform
Auto Program to set up your channels.
1
Press to turn on the TV. The Initial Setup screen appears.
2
Press the TV FUNCTION button.
3
Press on the remote control or in the TV front panel to perform
Auto Program, or press to exit.
To perform Auto Program again
1
Press .
2
Press g to highlight Channel Setup menu ( ).
3
Press f to highlight Cable. Press to select.
4
Press F or to select ON or OFF according to how you connected
your TV. Press .
5
Press f to highlight Auto Program. Press to search for channels.
The Initial Setup screen appears each time you turn on the TV until you
perform Auto Program.
After performing Auto Program, press to exit.
Auto Setup
Auto Program: [CH+]
Exit: [CH-]
First please connect
cable/antenna
F