background image

21

 GB

KLV-46S200A

2-685-864-

14

(1)

Usi
ng ME

NU 

F

unctio

ns

Dual Sound

Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.

.

Notes

• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select “Mono”. The sound 

becomes monaural, but the noise is reduced.

• The “Mono” setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when “Mono” is selected for the program 

position.

• You cannot receive stereo or dual sound when “Low” or “High” is selected in “Audio Filter” 

(page 27).

Tips

• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand, 

Malaysia, Thailand, etc.

• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand, 

etc.

• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” or 

“Sub”.

  Broadcasting

Selection

   NICAM stereo

NICAM (stereo sound)
Mono (regular sound)

   NICAM bilingual

NICAM Main (main sound)
NICAM Sub (sub sound)
Mono (regular sound)

   NICAM monaural

NICAM Main (main sound)
Mono (regular sound)

   A2 (German) stereo

Mono (regular sound)
Stereo (stereo sound)

   A2 (German) bilingual

Main (main sound)
Sub (sub sound)

010COV.book  Page 21  Thursday, September 7, 2006  1:39 PM

Summary of Contents for KLV-46S200A





































Reviews: