Sony KDL-60R550A, Operating Instructions Manual

Page: 102 / 120

44
GB
* The 1080p timing when applied to the HDMI/MHL input will be treated as a video timing and not PC timing.
Channel Set-up
SXGA 1280 1024 64 60 VESA
HDTV* 1920 1080 67.5 60 EIA
Analogue Set-up “Analogue Auto Tuning”: Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed. However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
“Manual Programme Preset”: Changes the available analogue channel
setting.
Press
to select the programme you want to modify.
“Programme”/“TV System”/“Frequency”
Presets programme channels manually.
1
Select “Programme”, then press .
2
Press
F
/
f
to select the programme number you want to manually tune
(if tuning a VCR, select channel 0), then press RETURN .
3
Press
F
/
f
to select “TV System”, then press .
4
Press
F
/
f
to select “B/G”, “I”, “D/K” or “M”, then press .
5
Press
F
/
f
to go to the “Frequency” then press .
6
Tune the channels as follows:
Press
G
/
g
to search for the next available channel. When a channel has been
found, the search will stop. To continue searching, press
G
/
g
.
Repeat the procedure above to preset other channels manually.
“Label”
Assigns a name of your choice, up to seven letters or numbers, to the selected
channel.
To input characters:
1
Press
F
/
f
to select the desired letter or number (“_” for a blank space),
then press
g
.
If you input a wrong character
Press
G
/
g
to select the wrong character. Then, press
F
/
f
to select the correct
character.
2
Repeat the procedure in step 1 until the name is completed, then press .
“AFT”
Allows you to fine-tune the selected channel manually. When “On” is selected,
the fine tuning is performed automatically.
“Audio Filter”
Improves the sound of individual channels when distortion occurs in mono
broadcasts in TV system “B/G”, “I” and “D/K”.
• You cannot receive stereo or dual sound when “High” is selected.
“Skip”
Skips unused channels when you press PROG +/– to select channels. (You
can still select a skipped channel using the number buttons.)
“Colour System”
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”
or “PAL60”) according to the channel.
Signals
Horizontal
(Pixel)
Vertical (Line)
Horizontal
frequency (kHz) Vertical
frequency (Hz)
Standard