Sony KDL-50R550A, Operating Instructions Manual

Page: 44 / 84

44
1
Press HOME , then select Settings >
Setup > Network > Network Setup .
2
IP Address setting/Proxy server:
– automatic setting:
Set up network connection > Auto
– manual setting:
Set up network connection >
Custom > Wired Setup
3
Follow the instructions on the set-up
screen.
Network Setup can also be set from
Initial Setup menu.
• Allows automatic configuration of your wired/
wireless network.
– When connecting with LAN cable: Wired
– When connecting with built-in Wireless
LAN: Wireless
– When connecting with both of the cables:
Wired
• Set to Auto , sets the IP address
automatically. For proxy server is not use.
• To use the network with IPv6, select
Settings > Setup > Network > IPv6/IPv4
Priority > IPv6 , then select Auto in Set up
network connection .
• When IPv6 is selected, HTTP Proxy cannot
be set.
Viewing the Network Status
You can confirm your network status.
1
Press HOME , then select Settings >
Setup > Network > Network Setup .
2
Select View Network settings and
status .
If You Cannot Connect
to the Internet
Use the diagnosis to check possible
causes for network connection failures,
and settings.
1
Press HOME , then select Settings >
Setup > Network > Network Setup .
2
Select View Network settings and
status .
3
Select Check Connection .
This may take several minutes. You
cannot cancel the diagnosis after
selecting
Check Connection.