32
Using the Screen Menu
Wide Mode
These options allow you to change the proportion of the screen.
Wide Zoom
Select to enlarge the picture uniformly.
Normal
Select to display 4:3 pictures in original size when the original source
is 4:3.
•
Normal
is not available when you are watching 1080i or 720p in High-Definition source.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (standard-definition source). When the original
source is 16:9 (high-definition source), select this mode to display 16:9
picture in original size.
Zoom
Select to enlarge the original picture without distorting the aspect ratio.
• If you press
of the remote control, you can also select these modes directly.
Auto Wide
On
Select to have the screen automatically change to the screen mode
based upon program’s content. Typically this requires special setup on
DVD equipment’s menu. If frequent screen changes are disturbing to
you, select
Off
.
Off
Select to turn off the
Auto Wide
option.
Choose a screen mode from the
Wide Mode
option.
4:3 Default
Select the default Screen Mode to use for 4:3 sources.
Wide Zoom
Select to enlarge the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible, with minimal distortion.
Normal
Select to display the 4:3 picture in its original size.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (standard-definition source).
Zoom
Select to enlarge the original picture without distorting the aspect ratio.
Off
To turn off automatic size for 4:3.
Vertical Center
Allows you to move the position of the picture up and down.
Vertical Size
Allows you to adjust the vertical size of the picture.
Phase
Adjusts to fine tune overall sharpness.
•
Phase
is disabled when the TV is receiving a different video input than PC.
